Need to upgrade PDU's and keep server running

[ncsujb]

I plan to change PDU's providing power to a DL server. Currently have it running on 120v 20 amp dual power supplies. The new PDU's will be 208v, 30 amp. I realize the Power supplies (PS) are auto sensing. Is it OK for server to be running one PS on 120v and the other 208v for a few minutes while swapping one side at a time, and upgrading both the 208v, L6-30? I want to keep server running during the upgrade.

[Ihaqueit]

Its not a good idea to different voltage running on server.

What the exact server it is, please mention the server model number.

[ncsujb]

DL380 Gen 10

[Ihaqueit]

My suggestion to go with same voltage, 120v 20 amp dual power supplies

[ncsujb]

LOL - Read the first message again. It WILL be on the same PDU type eventually. But as I do the switch, one PS will be on old 20 amp/120v while the other PS is on the new 30 amp/208v. I am not changing power supplies (PS). I am upgrading PDU's.

[Ihaqueit]

The question is existing running voltage any issue with server?

L6-30 - single phase and only has 3 prongs. 2 hot, 1 ground.

How many phase currently you using?

[Big_Banana]

Considering the PDU changes whichever input it is designed for, into what the server needs, you should be fine mis-matching.