ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Netflex 3/P and tlan driver won't work

 
nikolaii
Advisor

Netflex 3/P and tlan driver won't work

Hello, I have a Proliant 1500 with a Netflex 3/P NIC on it. I have installed Linux, (Debian), correctly configured network, the [latest] TLAN driver loads fine, but I can't connect to my network ! When I try to ping other machines, there is no reply. I have tried the RedHat distribution too; but there was the same problem. Before I have installes Linux, I had trying Win NT4 server, and all was wonderfull ! Then, I have make a system erase, configuring the server with the [latest] SCU diskettes, but then : no network ! Have someone any idea ?
3 REPLIES
harry d brown jr
Honored Contributor

Re: Netflex 3/P and tlan driver won't work

What is your routers IP?
What is your linux servers IP?
What is your netmask?
What is the IP of one of your other machines?

live free or die
harry
Live Free or Die
nikolaii
Advisor

Re: Netflex 3/P and tlan driver won't work

I have no router. It's just a LAN whith in moment no Internet connection. The server IP is 192.168.0.20, netmask 255.255.255.0, other IP is 192.168.0.10.
nikolaii
Advisor

Re: Netflex 3/P and tlan driver won't work

Just for information, after a long time :
I was able to bring this card working under OpenBSD, whitout any kind of problems !!

I think that the problem comes from the Linux driver.

Nico