HPE Community
ProLiant Servers (ML,DL,SL)
1753789 Members
7477 Online
108799 Solutions
New Discussion

Re: Network Card Teaming

 
Ayman Altounji
Valued Contributor

‎08-11-2002 04:00 PM

‎08-11-2002 04:00 PM

Network Card Teaming

Hi

Finally getting somewhere with my network card problems, tidied up the system and stopped the IRQ conflict errors but still left with the Team problem.

Currently have the two cards with separate IP addresses and when I run the teaming it asks for a third. When I've done this I'm left with the Team as one IP address and the two network cards with their own IP addresses. Each one is listed in TCP/IP config.

This is driving me nuts. How do I create a team with a single IP address for the two cards. I know it can be done because I've seen listed in the TCP/IP just the team setup and not the separate cards. Where am I going wrong?

Thanks
0 Kudos
Reply
1 REPLY 1
Sunil Jerath
Honored Contributor

‎08-13-2002 04:00 PM

‎08-13-2002 04:00 PM

Re: Network Card Teaming

Hello,
Please contact our Tech Support at 1-800-652-6672. Also make sure you have the S.No of the server available when you contact us.
Regards,
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.