ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Network Teaming

 
Sarah Brydon
Occasional Visitor

Network Teaming

Hi, I have two new Proliant ML350's, each with 2 NC3123 network cards that I would like to team together for improved performance. However, when I try to team the cards together, the message 'please wait whilst the cards team, this may take a few seconds' (or something to that effect) appears but then nothing else happens. The message does not disappear and the network cards to not team. I have to reboot the server and then delete the NIC devices, and uninstall/reinstall Compaq Teaming. The driver version of the network cards is 5.41.17.0 and the speed is set to AutoDetect. Any help on this problem would be appreciated. Thanks.
2 REPLIES
ZHANG Sheng
Occasional Visitor

Re: Network Teaming

Have you change the NUC to 100MB/full duplex?
and what team type did you make?
Sarah Brydon
Occasional Visitor

Re: Network Teaming

The cards are running on AutoDetect, and I've tried both types of teaming. Should I take them off autodetect then? Thanks.