cancel
Showing results for 
Search instead for 
Did you mean: 

Network

 
Ayman Altounji
Valued Contributor

Network

Hi,

I want to put this server into 2 VLANs, on our cisco catalyst switch.
So I configured the port of the switch to be an 802.1q trunking port.
Gave the ProLiant two IP addresses.
What else do I have to do on the ProLiant to get the thing running?
Or isn't it possible with the build in interface?
2 REPLIES
Sunil Jerath
Honored Contributor

Re: Network

Hello,
This is not a Hard Ware issue you'r encountering so I would suggest you contact you OS manufacturer which in your case would be MS or you may have to contact CISCO folks to help you set up VLANS.

Regards,
Ayman Altounji
Valued Contributor

Re: Network

The NIC has to support 802.1Q.
So it Depends on the O/S and the NIC being used.
Further information would be necessary to establish if it is possible.

Bottom line is Compaq/HP has to have a driver for that NIC that supports 802.1Q in your Operating System.