HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

New DL320 G6 can't find RAID controller

 
Jduehmig
Advisor

New DL320 G6 can't find RAID controller

I am setting up a new DL320 G6 server.  I have run the Smart Start CD version 8.7 and under maintenance I am attempting to configure the RAID controller.  However, the configuration utility shows 'no controller found'.  I've run the Support Pack and installed all available updates and firmware, but still no RAID controller.  What should I do next to make this work?

Thanks,

Joe

2 REPLIES
Jimmy Vance
HPE Pro

Re: New DL320 G6 can't find RAID controller

The standard DL320 G6 configuration uses an embedded B110 SATA RAID controller. Smart Start and the Array Configuration Utility only recognise the hardware based "P" series Smart Array controllers.

 

THe RAID function is enabled in System ROM,  and then you need a driver for your OS as this controller is software based RAID

 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Jduehmig
Advisor

Re: New DL320 G6 can't find RAID controller

Got it.  Thanks for clearing that up.  I will check in the BIOS later today.

Joe