cancel
Showing results for 
Search instead for 
Did you mean: 

New Install

 
John Abraham_1
Occasional Visitor

New Install

I have a ml110 g2 that has the 2610 SATA controller with 3 150 gig Drives. I am attempting to configure Raid 5, create the container and insert the windows 2003 SBS disk, program loads, press f6 load controller driver, and program states that there are no disk on which to install the OS. Please any suggestions.
2 REPLIES
Terry Hutchings
Honored Contributor

Re: New Install

How long did it take to initialize the raid 5 when you created it? When I did this it took approximately 2-3 hours for it to complete. If you just created the raid 5, but didn't initialize it, then this could be the cause of the problem you're having.
The truth is out there, but I forgot the URL..
HGN
Honored Contributor

Re: New Install

Hi

I would suggest to initialize the drives and try again,even after initialization if it does not show up,the os needs driver for the sata drives/controller.

Rgds

HGN