cancel
Showing results for 
Search instead for 
Did you mean: 

New Ml 150

 
scottie1121
Occasional Visitor

New Ml 150

Hi just took a new ML150 out off the box and the server support cd was bent and unuseable, I am stugguling to load sbs2003 as in wont see any drives and I cant connect a floppy to install the sata driver at install, is there anywhere I can download an image of the server support cd.
Thanks
2 REPLIES
KarloChacon
Honored Contributor

Re: New Ml 150

Generation 1 2 or 3?

regards
Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: New Ml 150

take a look of this

100 Series don't support SmartStart

1. You need a 1.44 MB USB Diskette Drive
"NOTE: For the installation of Windows and other OS's, a floppy drive may be required to complete driver installation. A USB drive key may not work to complete driver installation."

or second option
download the driver for your controller here
Controllers Drivers for G1
http://h18023.www1.hp.com/support/files/server/us/locate/69_5768.html

Controllers Drivers for G2
http://h18000.www1.hp.com/support/files/server/us/locate/69_6075.html#7

Controllers Drivers for G3
http://h18023.www1.hp.com/support/files/server/us/locate/69_6265.html


and try creating an image using your OS CD and adding your driver for your controller doing this you wont need to use a floppy unit

An Alternate resolution is to use nLite Software.
nLite Deployment Tool for Unattended Windows - Remove components, integrate hotfixes, drivers and themes. Tweaks, patches...

Information about nLite could be obtained here:
http://www.nliteos.com/nlite.html

it can be downloaded from here:
http://www.nliteos.com/download.html

regards
Didn't your momma teach you to say thanks!