New Proliant ML530 G3, XEON 3.0GHz

[Marcelo Evangelista]

Hi,
i have a ML530 G3 that it presented the follow problem.
error 212 - Failed Processor. Did You will know these problem? The System Board and Xeon Processor were replaced.

I Awating for answers,,,

[Leon Rosier]

Hi,

Have they been replaced both at the same time?...or first the system board and then the processor.? In the last case you have to set the cpu to corrected in F9 setup. Goto advanced options - set cpu corrected.

Leon

[Marcelo Evangelista]

Hi Leon,
Good News for HP Support Team. The Problem with ML530 G2 Server was corrected. The Problem was on the System Board. The System Board had "H" version, however the new System Board is "L" version. The "POST" error desappeared! The Multi-processor system is OK. Please, communicate all the people about this correction.

The ML530 G2, XEON 3.06GHz. (New Server)

Thanks for your attention...