ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

New logical drives in attached 4314R are not available

Ayman Altounji
Valued Contributor

New logical drives in attached 4314R are not available

I have a Proliant CL380 with an array of six 36GB univ. hard drives creating four logical drives.
I have attached a Compaq StorageWorks 4314R (190209-001) containing four more 36GB drives.
Using the COM1 port I created a new array and four more logical drives.
The CR3500 utility sees all 10 drives, all eight logical drives and all status is green.
Problem: When I perform a list devices on the Novell server console I only
see the two controllers and the four original logical drives. I should see
eight drives. A scan for new devices does not reveal any more than the original four.
Question: How do I get the new four logical drives to show up at the Novell server console so I can use them?
1 REPLY
Ayman Altounji
Valued Contributor

Re: New logical drives in attached 4314R are not available

Have you received a resolution to your problem? If you have not I can set this up in my lab and try to give you an answer.