ProLiant Servers (ML,DL,SL)
1748255 Members
4149 Online
108760 Solutions
New Discussion

Re: No Display Signal

 
SOLVED
Go to solution
Giridar_SL
Advisor

No Display Signal

Hi all

Have  DL380p G8, display singal is getting lost after sometime

i tried directly connecting the monitor frrom both front and rear VGA ports on the server

it is only working after a reboot

even RDP also not working, getting a black screen after connecting

pleease advise

1 REPLY 1
Sebasbin
HPE Pro
Solution

Re: No Display Signal


Hi Giridar_SL

>>Suggesting you to update the server BIOS/ILO firmware's to the latest versions and reboot the server.
https://support.hpe.com/hpesc/public/km/product/5194969/HPE-ProLiant-DL380p-Gen8-Server?ismnp=0&l5oid=5177957#t=DriversandSoftware&sort=relevancy&layout=table&numberOfResults=25
>>Then Shutdown the server.
>>Disconnect all the power source from the server [power supply from the wall outlet and remove all the PSU (power supply units) from the server].
>>Press and hold the power button for 15-30 seconds. Then try to power on the server and check for the results.
>>Restore the system default in Server BIOS.
>>Also you can perform the minimum configuration test. Refer the document :-https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c03667944


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo