No ILO console screen on DL380p Gen8 with installed Quadro K4000

[SyntaXT]

Hi All,

Does anyone knows how to get image on ILO console (with advanced license) when Quadro K4000 card is installed?

Currently I can only get image on DVI port on Quadro K4000, VGA out on server board is also without image.

I belive that this is standard behaviour when additional graphics adapter is inserted but ILO should allways be accessible.

On ILO console I can only see first part of BIOS initialization a,d after that nothing (no HP logo, SmartArray...) you know what i mean.

Regards,

K.

[Jimmy Vance]

iLO is tied to the embedded video card. Once you install a stand up video board, you will no longer get any video over iLO

[JACOBPAR]

Thats correct, same issue here everytime. No help for you, but the only thing that helped us was a IP KVM Switch.

[SyntaXT]

Thanks guys.
I just found this: http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/DL-360-two-VGA-iLO-No-Video/td-p/5570553#.U5DE7toayK0
Will try tomorrow.

[JACOBPAR]

Good hint! Found BIOS option on a DL380 g8 to set onboard video as primary. Will try this weekend also...