No Link on 82571EB Gigabit Ethenet Controller

[mho27]

Hi,

my 82571EB Ethernet Nic has two ports. But just the first interface has a link! BIOS and Xenserver shows both NICs, so it seems to work...

"Has Link" means, the LEDs are blinking. When doing a cross check (with the working cable), still no LED blinking.

The card did work at a HP DL 380 G5, now its in a DL 380 G6.

Port A is working fine. Link (LED) up and running...

Any idea what to do to active the second Port?

Bios settings seems to be normal..

Thanks for reading.

Regards,

Matthias

[mho27]

Forget about it, sorry...

Just had to wait about 2 hours - no idea why.

Now it works.

Normally I am used that plugin in a cable works immediatly.

Regards,

mho