ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

No Link on 82571EB Gigabit Ethenet Controller

mho27
Occasional Contributor

No Link on 82571EB Gigabit Ethenet Controller

Hi,

 

my 82571EB Ethernet Nic has two ports. But just the first interface has a link! BIOS and Xenserver shows both NICs, so it seems to work...

 

"Has Link" means, the LEDs are blinking. When doing a cross check (with the working cable), still no LED blinking.

The card did work at a HP DL 380 G5, now its in a DL 380 G6.

 

Port A is working fine. Link (LED) up and running...

Any idea what to do to active the second Port?

 

Bios settings seems to be normal..

 

Thanks for reading.

 

Regards,

Matthias

1 REPLY
mho27
Occasional Contributor

Re: No Link on 82571EB Gigabit Ethenet Controller

Forget about it, sorry...

 

Just had to wait about 2 hours - no idea why.

Now it works.

 

Normally I am used that plugin in a cable works immediatly.

 

Regards,

mho