HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

No Physical Disks Found!

 

No Physical Disks Found!

On my DL380 I am trying to install Windows 2000, everything starts up ok but the 5i Array controller takes some time to initialize, when it is done it tells me:
Slot 0 HP Smart Start 5i Controller failure [Commend failure(cmd=11h, err=020h)]
I have re loaded the Array driver tried all utillities I can find but still no disks are found.

Any one can help??
3 REPLIES
Tom Mucha_1
Trusted Contributor

Re: No Physical Disks Found!

Is this a G2 or G3?

But it sounds like a bad 5i to me. If it's a G3 you can try reseating the memory card. If it's a G2 you can try reseating the whole controller. Reseating them might help. But if not, you'll have to call HP or your service provider to get a warranty replacement.

Re: No Physical Disks Found!

The controller did work up until I tested the mirrored disks, now I am trying to get the system back up. Do I reset everything using the Erase Utility?

Erase All Drives
Erase NVRAM
Erase CMOS.

Thanks for your help

Tom Mucha_1
Trusted Contributor

Re: No Physical Disks Found!

It's worth a shot running a system erase, but my gut feeling still thinks it's a bad 5i.

If it's the G2, the daughter board just gets replaced. If it's a G3, the whole motherboard needs to be swapped out.