No boot after installing Linux on ML150 G9

[Jose_Antonio]

Dear all, please help:

Steps I did to install a supported Linux by HPE:

• Connect the Ethernet cable between the network connector on the server and a network jack.
• Press the Power On button.
• During server POST, press F10 for Intelligent Provisioning.
• Complete the initial Preferences of Intelligent Provisioning.
• At the 1 Start screen, click Configure and Install.
• Image of Linux on DVD inserted. Instelligent Provisioning starts installation of SO. Finish the installation, follow the onscreen prompts. 
• Reboot… System doesn’t start the SO on the hard disk.

Thanks for your help!