ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

No hard disk found

 
gapounet
Occasional Visitor

No hard disk found

Hi,

I trie to install suse enterprise 9 on a proliant ml110 G3 server with SATA disk 80G.

I launch installation but no hard drive found by system.

I can see the disk on the bios.

I load the module :
adpahci.v1.19.V414A19.V041A7.sles9.x86_64.img
aarich-6.00.075-1.sles9x86_64.x86_64.img

but it is not work...

I have the good modules ??

Thank for your help.
3 REPLIES
John Andre Gjerde
Occasional Visitor

Re: No hard disk found

I have the same problem. I got the system installed by swithing the IDE setting in BIOS to "Compatible" and SATA primary, PATA Secondary. During installation screen I had to select safe mode. Otherwise the machine would crash during the formatting.

The problem for me now is that I have a second disk and RAID capability that i cannot use and I'm pretty much stuck in safe mode for now. I've also tried the module "aacraid-driverdisk-sles9.img" from the Adaptech Site. That didn't do much.

Hope someone can help.
Sivakumar TS
Honored Contributor

Re: No hard disk found


Hi,

Check these urls,

SuSE 9.2 Pro on Precision 670 SATA detection

http://lists.us.dell.com/pipermail/linux-precision/2005-April/000485.html


http://distrocenter.linux.com/print.pl?sid=04/10/29/205203

Hope you can get some input form these,

Siva
Nothing is Impossible !
John Andre Gjerde
Occasional Visitor

Re: No hard disk found

I just gave up sles9 all together. Tried out Fedora Core 4 instead and had no problems with hardware. Note that I never tried sles9 sp2. Perhaps that would have had no problems either. Post a mesg here if you try it and let me know how it worked.