HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

No option to configure Rack / Enclosure name in ILO

 
Rajiv Nayyar
Occasional Visitor

No option to configure Rack / Enclosure name in ILO

I got ver 2.2 for Server Blade Enclosure and Power Enclosure, but still cannot see the option in ILO to configure Rack & Enclosure names. Thanks in advance.
Regards.
4 REPLIES
Oleg Koroz
Honored Contributor

Re: No option to configure Rack / Enclosure name in ILO

Tv_3
Respected Contributor

Re: No option to configure Rack / Enclosure name in ILO

Try updating the firware,

The sollution will be in there...

Sincerly
Chaos, Panic or Disaster??? Always Stay Calm, I will fix it.
Steven Baillie
Trusted Contributor

Re: No option to configure Rack / Enclosure name in ILO

Go into the ILO that is in slot 1 of the Enclosure and go to the BL p class tab, then choose rack view then choose the enclosure and then choose details next to enclosure name. IT is here that you can change the rack name and the enclosure name. you will need to go into the ilo in slot 1 in another enclosure to change the other enclosure name.


the ILO managment ports have to be connected at the back for this to work.

steven
Rajiv Nayyar
Occasional Visitor

Re: No option to configure Rack / Enclosure name in ILO

Sorry folks, I could not reply earlier as I was away from work. Yes it works as suggessted by Steve. Thanks to all of you. Regards.