HPE Community
ProLiant Servers (ML,DL,SL)
1753559 Members
5948 Online
108796 Solutions
New Discussion

No power

 
Ayman Altounji
Valued Contributor

‎02-20-2001 04:00 PM

‎02-20-2001 04:00 PM

No power

The server was powered off and opened for a "general dusting". When we closed the server back up, the server would not turn on. No matter what we did, we got no power. The LCD is on and there are green lights on both power supplies. What could this be? Could it be an internal case switch? If so, where are all of them so we can check. This server is crucial to us and we need it back up ASAP. Thank you.

Jeffrey D. Yadzinski
Systems Administrator
Lehigh Valley Hospital
610-402-1339
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎03-26-2001 04:00 PM

‎03-26-2001 04:00 PM

Re: No power

In a Downed Server Situation, you need to contact Server Support at (800)652-6672. Technicians are available 7 x 24 x 365 to provide real time assistance in troubleshooting issues of this nature. You will need to reseat every board and check every cable to ensure that everything is properly seated/connected.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.