HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Non Hot Plug and Hot Plug drives combination

 
SOLVED
Go to solution
elloco40
Occasional Contributor

Non Hot Plug and Hot Plug drives combination

I have an ML110 G4 with an array of 4 SATA 250 GB Non Hot Plug drives.
I need to replace one disk because it is failing.

Can anybody tell me if it's possible to replace it with a SATA 250 GB "Hot Plug" drive that I have right here, or if it's mandatory to replace it with the same "Non Hot Plug" drive?

Thanks !
2 REPLIES

Re: Non Hot Plug and Hot Plug drives combination

Hi

check this link.
http://h18000.www1.hp.com/products/quickspecs/12577_div/12577_div.HTML#Storage

regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Patrick Terlisten
Honored Contributor
Solution

Re: Non Hot Plug and Hot Plug drives combination

Hello,

this will not work. You need a NHP drive. The hot-plug drive has another connector.

Regards,
Patrick
Best regards,
Patrick