ProLiant Servers (ML,DL,SL)

None of my drives showing up on Proliant DL 360 G7.

 
TylerLewis
New Member

None of my drives showing up on Proliant DL 360 G7.

I have been having issues with installing windows server on my server. None of my drives show up and when i go in to cmd from the installer the only drive that shows up is the removable one. all of the drives are properly installed and the green lights are on next to them.

1 REPLY 1
Sebasbin
HPE Pro

Re: None of my drives showing up on Proliant DL 360 G7.

Hi,

Please verify if the hard drive detected in the ORCA by press F8 in POST (Option ROM Configuration of Arrays (ORCA).

If the drives is not detected ,remove and re-fix the cables from the smart array controller to the hard drives backplane and verify.

If still issue observed ,you may need to log a support case with HPE .


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo