ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Norton Ghost Problem "There is no valid source drive to choose (11032)"

SOLVED
Go to solution
Mario Montero
Occasional Visitor

Norton Ghost Problem "There is no valid source drive to choose (11032)"

Hi.
Im trying to create a image from a DL380 G2 server.
I tried using a separate small switch and connected there the ghostcast server PC and the two network cards of the server and did not work (with multicast, unicast, etc).

I tried using one card of the server at the time (with multicast, unicast, etc) with the switch and it didn't work.

I could ping the PC and server both ways but the same error message appeared when trying to create an image: "There is no valid source drive to choose".

I checked the ghostcast server PC with a PC and it's working fine.

Any ideas??
Any help would be appreciate it!.
3 REPLIES
Brian_Murdoch
Honored Contributor

Re: Norton Ghost Problem "There is no valid source drive to choose (11032)"

Hi Mario,

I have successfully ghosted my DL380 G2 server (2 X 18Gb in Raid 1, 4 X 72Gb in Raid 5)using the RILOE Virtual floppy disk and sent the images to an Altiris RDP server.

You don't have to do this but please contact me and I can send you further details as it should work OK with a ghost boot disk.

brian.murdoch@hotmail.co.uk

Brian


Mario Montero
Occasional Visitor

Re: Norton Ghost Problem "There is no valid source drive to choose (11032)"

Hi Brian.

I need to find NIc drivers for the HP NC3163 Fast Ethernet in NDIS or DOS options to create a bootable disk in ghost.

Please let me know where to find them.

Regards!
Brian_Murdoch
Honored Contributor
Solution

Re: Norton Ghost Problem "There is no valid source drive to choose (11032)"