Not dettected SAS HDD When installing Window Server 2016

[Phat-MRum]

Hi all,

I really need your help . My server is HP proliant DL380 G10. 

I configured raid 5 with 1 hot spare in intelligent provisioning Tab successfully.

The problem is when I installed windowe server 2016 Standard by USB boot, SAS HDDs are not detected.

Can I have your opinions to solve this problems.

Many thanks.

[BPSingh]

Greetings!

I understand that you have configured logical drive successfully however the same is not getting detected during windowe server 2016 Standard installation. 

1. Please try installing OS using Intelligent Provisioning. If you have already tried, please confirm version of IP installed. You can check it from the system information option within IP

2. What is the Storage controller used? If you are installing OS directly, then the controller driver need to be provided explicitly. 

[Cali]

You can find a Solution here:

https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/HP-Generation-10-Server-Hard-disk-invisible-during-manual/m-p/7028199#M164941