HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Nt srv repair / DL380 G2

 
Jarmo_1
Occasional Visitor

Nt srv repair / DL380 G2

Hi!
I have Proliant DL380 G2 server with 3 36,4 ultra scsi drivers (array; logical drive 1, RAID 5, 67,8Gb)
Im trying to repair nt server 4 (booting from nt srv cd) installation but it doesnt find those scsi disks. I install Smart array driver when asked(that goes ok), but it doesnt help...
Can anyone please help me?
*jarmo*
1 REPLY
Glen_10
Advisor

Re: Nt srv repair / DL380 G2

The following link give more explanation that I will provide here but basically you need to press F6 during the setup/repair of the NT server and then specify the Storage Controller driver.
http://www.portwell.com.tw/faq-detail.asp?question=008