HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Once again

 
Elisabeth Rhomberg
Occasional Contributor

Once again

Is the following network card supported by the HP Pro Liant ML370 G4 Server:
NC1020 Gig PCI 10/100/1000T
1 REPLY
Andrzej Kowalik
Honored Contributor

Re: Once again

Yes,
http://h18000.www1.hp.com/products/quickspecs/12029_div/12029_div.HTML
but remember:
"NOTE: Any NIC (except the NC1020 and the NC150T) on the option list can be used for redundancy with the embedded NC7781 Network Controller. When teaming with other NICs or with the embedded NIC, the lack of Jumbo Frames and LSO features on the NC1020 and NC150T will cause high end NICs to have those features disabled. (e.g. incompatibility issues with the other option NICs for that platform)."
regards,
Andrzej