HPE Community
ProLiant Servers (ML,DL,SL)
1751966 Members
4704 Online
108783 Solutions
New Discussion юеВ

Only 4GB Primary Partition create using smartstart

 
Ayman Altounji
Valued Contributor

тАО09-23-2001 04:00 PM

тАО09-23-2001 04:00 PM

Only 4GB Primary Partition create using smartstart

Dear,

When I using the smartstart 5.10 to install Windows 2000 Server w/SP2 ( Select version ), Only get 4GB Primary partition even I choose 6150MB which was the default size for Window 2000 server primary partition in smartstart. Any Idea ? I also using smartstart 5.00 w/ Windows 2000 w/o sp cd. I got the same result.

Hardware configuration :
ML530R w/ 2 x PIII 1GMz CPU
2GB Ram
5304 w/128MB Cache RAID Controller
6 x 36GB Hot-Plug HD
2 x NC3134 NIC
0 Kudos
Reply
2 REPLIES 2
Ayman Altounji
Valued Contributor

тАО09-23-2001 04:00 PM

тАО09-23-2001 04:00 PM

Re: Only 4GB Primary Partition create using smartstart

I have the same issue with a DL360. I had to reinstall it and cannot get it to create the partition at anything other than 4GB even though it had previously been setup at 6GB using the same Smartstart. Go figure.
0 Kudos
Reply
Ayman Altounji
Valued Contributor

тАО09-25-2001 04:00 PM

тАО09-25-2001 04:00 PM

Re: Only 4GB Primary Partition create using smartstart

Hi,

I find the solution. If you want 6GB Primary Partition. You just type 8GB in the smartstart ! They will be minus 2GB on that. Smile.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.