ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

P2000 G3 & DL360P G8 | Problems connection

Raykler
Occasional Visitor

P2000 G3 & DL360P G8 | Problems connection

Hi!

 

I have two HP Proliant DL360P G8 servers, and a HP P2000 G3 MSA.

 

  • I need put into the P2000 the database for user access.
  • I also need do clustering with both DL360P servers.

 

I have configured all the iSCSI ports and I can do ping to them, but I don't know how to access to the disks, and I didn't found information about it.

 

Could you help me please?

3 REPLIES
Torsten.
Acclaimed Contributor

Re: P2000 G3 & DL360P G8 | Problems connection

You won't see any disks, you need to create volumes (LUNs) and present them to the servers.

Logon to the web interface (SMU) and configure the array.

Have a look into the SMU user guide.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Raykler
Occasional Visitor

Re: P2000 G3 & DL360P G8 | Problems connection

The LUN is already created (just one).

I have each server connected to an iSCSI port.

 

I can't find how to present the LUN to the servers.

 

And is it any guide about how to do the clustering between the servers? (It should be with the infrastructure, not VMware or similars)

Raykler
Occasional Visitor

Re: P2000 G3 & DL360P G8 | Problems connection

Finally, I got it following two guides (mount the LUNs), I put them here because it can help someone.

http://blogs.technet.com/b/filecab/archive/2012/05/21/introduction-of-iscsi-target-in-windows-server-2012.aspx

http://cscmblog.blogspot.com.es/2012/11/windows-2012-how-to-configure-multi_13.html

 

I still needing do the (infrasctructure) clustering between both servers DL360P G8, can someone help me?