HPE Community
ProLiant Servers (ML,DL,SL)
1753611 Members
5995 Online
108797 Solutions
New Discussion

P410 vs P400 performance: seeing no improvement

 
markgwoodruff
Occasional Contributor

‎05-25-2012 10:29 AM

‎05-25-2012 10:29 AM

P410 vs P400 performance: seeing no improvement

I upgraded a DL585G2 with a P410+P411/MSA70 but am still seeing all the SAS drives at 3G and all the SATA at 1.5G. Is this a limitation of the backplane/MSA70? Was expecting the SATA to go to 3G at least.

 

Do these controllers offer any performance advantage over a P800 in G2/G5/G6 machines?

 

Thanks,

Mark

0 Kudos
Reply
1 REPLY 1
Goutham_Sabala
Esteemed Contributor

‎05-28-2012 07:25 AM

‎05-28-2012 07:25 AM

Re: P410 vs P400 performance: seeing no improvement

Are all the SATA hard drives configured are of 3G speeds ? I ask this because even if one hard drive is of 1.5G , controller scales down rest of the drives in that logical drive to 1.5G drives. If you can attach ADU here I will take a look
Was the post useful? Say thanks by clicking the white KUDOS Star!
Goutham Sabala
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.