HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

P410 vs P400 performance: seeing no improvement

 
markgwoodruff
Occasional Contributor

P410 vs P400 performance: seeing no improvement

I upgraded a DL585G2 with a P410+P411/MSA70 but am still seeing all the SAS drives at 3G and all the SATA at 1.5G. Is this a limitation of the backplane/MSA70? Was expecting the SATA to go to 3G at least.

 

Do these controllers offer any performance advantage over a P800 in G2/G5/G6 machines?

 

Thanks,

Mark

1 REPLY
Goutham_Sabala
Esteemed Contributor

Re: P410 vs P400 performance: seeing no improvement

Are all the SATA hard drives configured are of 3G speeds ? I ask this because even if one hard drive is of 1.5G , controller scales down rest of the drives in that logical drive to 1.5G drives. If you can attach ADU here I will take a look
Was the post useful? Say thanks by clicking the white KUDOS Star!
Goutham Sabala