HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

P410i / DL380G6 Raid config.

 
gunta
Occasional Contributor

P410i / DL380G6 Raid config.

Hello!

We want to install 8 physical drives with raid 1+0. So we get 4 logical drives.

But when we try to install the third logical drive we get the following message:
(Two logical drives are no problem).

*********************
You cannot create another logical drive, you have reached the maximum number of logical drives supported by ORCA. You must use the array configuration utility to create more logical drives.
*********************

We have try the BIOS utility and also the ACU from the SmartStart CD. The System is blank and we will install ESX 4.0.

Thanks for help!
Gunta

 

 

P.S. This thread has been moevd from General to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

3 REPLIES
Patrick Terlisten
Honored Contributor

Re: P410i / DL380G6 Raid config.

Hello,

you want to create four logical drives with each two disks and RAID 1+0, right?

Do you get the same message by using ACU? Can you post a screenshot of it?

Regards,
Patrick
Best regards,
Patrick
gunta
Occasional Contributor

Re: P410i / DL380G6 Raid config.

Yes, that`s wright, four logical drives.
With ACU there comes no message. After 2 logical drives I have no possibility to create the third one. The button for creating a new RAID is not shown.
Jan Soska
Honored Contributor

Re: P410i / DL380G6 Raid config.

Hello,
check my post on thread: http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1435768 - I am afraid you wave p410i without cache!.

jan