HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

P410i RAID Controller Indicates Failed on New System Board

 
pkeeslar
Occasional Contributor

P410i RAID Controller Indicates Failed on New System Board

HP DL 380 G7 System Board Replaced due to RAID Contoller Failure.  New System Board indicates the same problem.  Can't even see the RAID controller unless you hit F8 during boot, then go to iLO menu and reset to factory defaults.  At this point the system reboots and indicates a P410i RAID controller failure.  System is running SOL 10 X86.  Worthless without the RAID in a 1+0 config.