ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

P410i controller issue

 
Gambit5150
Occasional Contributor

P410i controller issue

I have a DL380 G6 with P410i controller on all of the latest firmware. I have 6Gbps SAS drives connected. When I look at the report on an individual drive, it lists the following:
Phy 1: 6GBPS Phy 2: Unknown

and the Negotiated Link Rate is Unknown.

The disk speed on the server is unbeliavably slow. Why is this occurring? What is causing the drive information to be screwed up? Isn't this supposed to show 3Gbps per port, not 6/unknown?
2 REPLIES
cnb
Honored Contributor

Re: P410i controller issue

What version of drivers and agents are you using?

What report are you referring to? ACU? ADU? SIM?

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00293377/c00293377.pdf

Note:ALL components (disks, controller and backplanes) must be updated using the Firmware CD in order to sustain 6GB rates:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884082&swItem=MTX-9c4a1bc0777a46b08aa3f1fb8d&prodNameId=3884083&swEnvOID=1005&swLang=13&taskId=135&mode=5



Rgds,

Gambit5150
Occasional Contributor

Re: P410i controller issue

I have not found a solution and have RMA'd the hardware.