ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PB Proliant DL 360 G4

 
ZINSZNER
Occasional Visitor

PB Proliant DL 360 G4

We have PB with DL360 G4 W200K server
Some process ( compilation , build , ..) crash
When we stop all the HP services everything is ok!
EZ
3 REPLIES
Terri Harris
Honored Contributor

Re: PB Proliant DL 360 G4

Is this a new server setup? First thing is to make sure System BIOS, firmware & HP drivers are all current. Update BIOS & FW first if necessary from here:

http://h18023.www1.hp.com/support/files/server/us/locate/20_4706.html

Then update PSP (Proliant Support Pack) to 7.20.

If this does not help, provide more detail on the server config (W2k Spk#, amt of memory, major apps). And specifically what HP services are we talking about?
ZINSZNER
Occasional Visitor

Re: PB Proliant DL 360 G4

Thank you for reply.
More Informations.

The server is new 01/2005
OS : W2k server Spk 4
PSP : 7.10

APPS : nant-0.84

WINDOWS SYSTEM LOG extract
Application popup : NAnt.exe - Erreur d'application : L'instruction à "0x791cfea1" emploie l'adresse mémoire "0x00000050". La mémoire ne peut pas être "read".

I stop and give "manual" start options to all HP services and now we dont have any PB!

OK I a
Terri Harris
Honored Contributor

Re: PB Proliant DL 360 G4

Looks like there is a conflict between one or more of the HP management services/software and the NAnt .NET-based built tool you are using. There are no known issues (from HP) with this particular application & the HP Proliant management software. If you want to further troubleshoot, add back services one at a time & see what you can & cannot run with this application.