ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PCI Configuration error

 
Sunnaran Vasu
Occasional Visitor

PCI Configuration error

A number of our HP QLogic fibre cards QLE2462 have similar issues, when servers ML370G4 and ML570G3 boot up. These cards are located in PCI-Express slot. Does anyone know if there is a fix for this.
2 REPLIES
Oleg Koroz
Honored Contributor

Re: PCI Configuration error

had you run any firmware Update for FCA ? Or Run latest firmware

http://h18006.www1.hp.com/storage/saninfrastructure/hba.html

Sunnaran Vasu
Occasional Visitor

Re: PCI Configuration error

I have checked on Qlogic and found the following link
http://support.qlogic.com:8080/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=12184&sliceId=&dialogID=212770&stateId=0%200%20198889

Qlogic need to send the NVRAM files to be able to run the flasutil and reset the nvram.
Hopefully this will resolve this problem.