HPE Community
ProLiant Servers (ML,DL,SL)
1753696 Members
5501 Online
108799 Solutions
New Discussion

Re: PCI Memory Controller?

 
Ayman Altounji
Valued Contributor

‎03-28-2001 04:00 PM

‎03-28-2001 04:00 PM

PCI Memory Controller?

I've got Win2K Server installed on an ML530 and I have several yellow exclamation points under the hardware device manager. I'm assuming the Compaq SCSI controller ones are there because I've got the embedded ones disabled. The one I'm not sure about is this PCI Memory Controller that shows up under Other Devices? I don't see and drivers that would pertain to this, so I was wondering if there is something I am missing? It's a dual 933 box with 3GB or ram installed. Any help would be greatly appreciated!

Thanks,

Scott
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎08-23-2001 04:00 PM

‎08-23-2001 04:00 PM

Re: PCI Memory Controller?

I think that you have a Remote Insight PCI / Remote Lights Out board installed.
Just install the REmote insight and ATI IIC drivers from the CPQ supportPaQ.
After this you will see two ATI IIC adapters in device Manager, one of them with a yellow mark. This one is the embedded one and can be disabled.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.