ProLiant Servers (ML,DL,SL)
1748272 Members
4246 Online
108760 Solutions
New Discussion юеВ

Re: PCI Power Fault - DL580 G2

 
Gregory Haun
Advisor

PCI Power Fault - DL580 G2

Hello,

I have several DL580 G2 servers. When I try to install an M-Audio 1010LT card, I receive the power fault red light and a message at boot as well as two beeps per card installed. Does anybody know if there is a way to disable the power fault - hot plug, so that I can use these cards. I have a supermicro server, where things work fine, as well as any standard PCI or PCI-X slot.

Thanks,

Gregory
3 REPLIES 3
tomasz.puchalski
Valued Contributor

Re: PCI Power Fault - DL580 G2

Did You try to install card in slot 1 or 2?
Gregory Haun
Advisor

Re: PCI Power Fault - DL580 G2

Hello,

I have tried the cards in all slots. In slots 1 and 2, I don't receive a power fault; though, the card is not seen either.

Is there some setting in the bios that could be changed? These cards work fine in all other non DL580 G2 machines.

Thanks,

Gregory
KarloChacon
Honored Contributor

Re: PCI Power Fault - DL580 G2

hi


when you say "all other non DL580 G2 machines" you mean other HP servers?

try clear NVRAM with the card put and with the card in

also update System ROM

regards
Didn't your momma teach you to say thanks!