HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PDU management module can not change ip address

 
Simon Gao
Occasional Advisor

PDU management module can not change ip address

There is one hp  pdu and pdu management module, P/N and Description as below :

AF510A HP PWR Monitor PDU SNGL 1PH 32A INTL

AF400A HP PDU Management Module

 

Before i setup ip : 10.x.x.23 , today i change ip to 192.168.x.33 by browser. But after reboot device the ip reback : 10.x.x.23. This is why? Anyone tell me what reasons, thanks in advance!

 

By the way, i have some questions about this field:

 

1. If the pdu sockets stop output while press PDU reset button and management module reset button?

 

2. If the pdu and pdu module will clear settings parameters while press PDU reset button and management module reset button?

 

3. It will not affect normal using wether DIP switch 1 and 2 location, will it ?

 

 I appreciate your help!

 

 

1 REPLY
Simon Gao
Occasional Advisor

Re: PDU management module can not change ip address

i do not know this message if should put here, or other place?