PL 1600R part numbers needed

[Richard Cini_1]

I'm looking for two parts for my PL 1600R server. Here's a description:

(1) Hard drive bracket for using a non-hot-swap hard drive in the Removable Media Bay. Picture attached. I had been given two part numbers (243231-001 and 247239-001) previously. 243231-001 is not the right one and I can't locate the 247239 part number in PartMiner.

(2) I need to downgrade this server from the redundant power supply option to the stock 325w supply. The stock supply is not as tall as the RPS and seems to sit on a U-shaped metal bracket (maybe 1" tall) that has the same dimensions as the power supply. I already have the part number for the replacement backplate. A part number is not shown on the exploded parts diagram.

Thanks in advance.

[Mike Bollman_1]

1)not sure on that one.
2)325W power supply w/bracket part# 271916-001

[Bill Wood_3]

Part number for misc hardware kit:

111567-001

Part number for P/S Brkt is:

270265-001

[Richard Cini_1]

I subsequently found out that the part number for the hon-hot-swap drive bracket is 113678-001, which may be part of the miscellaneous hardware kit 111567-001.

Thanks.

[Richard Cini_1]

I just received a separate email from someone indicating that the part number for the bracket that sits under the power supply is 283621-001. Do you know if this is part of the Power Supply Brackets Kit 270265-001?

[Bill Wood_3 · Accepted solution]

The part number for the bracket that sits under the power supply is 283621-001, however it is not a spare part number. That part is included in the spare part number that I gave you for the Brackets Kit 270265-001?

[Bill Wood_3]

BTW,

113678-001 is invalid. The bracket part number for the half height drive is 113673-001 and it is contained the the misc HW kit part number that i gave you.

[Richard Cini_1]

It's very possible that the person who read the number to me off of the bracket mis-read the "3" for an "8". Thanks for catching it.

Rich

[e4services]

Richard, Glad you got your answer. It looks like what I thought last is true. THe bracket must be used with those green slid brackets for the drive. It was throwing me that the bracket had no holes for mounting the drive. Thanks for the learning process. It's in the vault now.