ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PL330 with SA642 "PopUp"-Message when RAID fails

 

PL330 with SA642 "PopUp"-Message when RAID fails

We are looking for a simple solution to recognize if the RAID-System fails.
At the moment we don´t get any information if a harddisk fails.
The system still works an you only get information about
the "broken" harddisk if you read the logfile.

Is there a little monitor-program on the "SmartStart CD" ?

Thanks
for any good idea

Tom
1 REPLY
Igor Karasik
Honored Contributor

Re: PL330 with SA642 "PopUp"-Message when RAID fails

You can use Insight Event Notifier - part of Proliant support pack.
You need to configure this service
(Start->Programs -> HP management agents ->Event Notifier config)

If you have many Proliant servers consider HP insight manager implementation
http://h18013.www1.hp.com/products/servers/management/hpsim/index.html