ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

POST ERROR CODE:48h 177-CONFIGURATION CONTROLLER NOT COMPLETE.CONTROLLER ORDER NOT SETUP

 
Michael M. Reyes
Occasional Visitor

POST ERROR CODE:48h 177-CONFIGURATION CONTROLLER NOT COMPLETE.CONTROLLER ORDER NOT SETUP

Whenever the server is rebooted it hangs on press F1 to continue, asfter pressing F1 it boots normally to windows.
I also get a post error code:48h
177-
configuration not complete.
controller order not setup.

1 REPLY
Janine Bertolo
Honored Contributor

Re: POST ERROR CODE:48h 177-CONFIGURATION CONTROLLER NOT COMPLETE.CONTROLLER ORDER NOT SETUP

Hello;

A little more detail will help to determine what's going on here.

Which server is it you're working with?

My guess is that you have a model with an embedded array controller but you're not using it.

In that case you can disable the use of the controller (in the F9 setup) or disable the F1 prompt at post as a workaround.

Hope that helps,

Janine
To get results you've never had before, try something you've never tried before.