ProLiant Servers (ML,DL,SL)
1753427 Members
5022 Online
108793 Solutions
New Discussion юеВ

POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator

 
ARTHUR HELLER
New Member

POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator

Running a ProLiant DL385 G2 and RedHat Enterprise Linux 4 ES U3 with supportpack 7.80 today we received the message shown in the subject by the HP System Mgmt Homepage/Integrated Mgmt Log and another message by the HP Insight Mgmt Agents Trap Alarm:

Trap-ID=3039

Accelerator Board Bad Data, slot number : 3.
Accelerator lost battery power. Data Loss possible.

In SLot 3 we have the Smart Array E200 Controller lookin fine in HP System Mgmt Homepage, and so does the accelerator. Screen shot enclosed.

What has to be done?

Kind regards,
Arthur Heller/Atos Origin/Vienna.
4 REPLIES 4
V├нctor Cesp├│n
Honored Contributor

Re: POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator

It looks like the E200 battery had a failure, but the data on the cache did not got erased.
Did the server rebooted unexpectingly?
Check in IML if there are more messages related to Smartarray battery.
ARTHUR HELLER
New Member

Re: POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator

The server has been rebooted intentionally the time when the error occured.

The IML does not show more messages related to Smartarray battery.

KR, Arthur.
sanesh vig
Valued Contributor

Re: POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator

It looks like battery failure or the cache failure as well , however before replacing any part you could try the following steps

Disconnect the battery from the controller

Reboot the server

Reconnect the battery

Reboot the server and check if the error message still persists.

Firmware of E200 controller is already updated (Version 1.66)
Roy Main
Valued Contributor

Re: POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator

Can you upload an ADU report on this?