HPE Community
ProLiant Servers (ML,DL,SL)
1752557 Members
4481 Online
108788 Solutions
New Discussion

Re: PPM Failure - DL380 G3

 
Grapeman
Occasional Visitor

‎07-13-2012 02:57 PM

‎07-13-2012 02:57 PM

PPM Failure - DL380 G3

Hi all!

 

I've just got a 2nd-hand DL380 G3 and I am a little puzzled with something...

 

There are 2 CPUs installed along with 2 PPMs. Both the PPMs' LEDs are orange (indicating a failure), system health LED is red and the server is not displaying any video output.

 

I managed to get hold of a known working PPM from a friend's DL380 G3 and still the PPM LEDs are orange.

 

What else could be causing the PPM failure?

0 Kudos
Reply
1 REPLY 1
Goutham_Sabala
Esteemed Contributor

‎07-13-2012 09:56 PM

‎07-13-2012 09:56 PM

Re: PPM Failure - DL380 G3

Try an alternate power supply , this has been the most likely cause in the past. System board could be the next possible cause
Was the post useful? Say thanks by clicking the white KUDOS Star!
Goutham Sabala
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.