ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PROBLEM CONNECTION REMOTE CONSOLE

questionanswer
Occasional Contributor

PROBLEM CONNECTION REMOTE CONSOLE

Good Morning,
I have a problem with a DL380 G5 server, which I've upgraded the ILO firmware from version 1.50 to version 1.80.
he problem is that I can not get Remote Console to this server, try the message "java.net.ConnectException: Connection timed out: connect".
He dismissed the problem of JAVA, and I can easily get to other servers, and also I've uninstalled and version changed without achieving success.
I've restarted the server, and even, I've disconnected from the power supply.
Is there anyone who has a similar problem?.
Thanks for the help.
greetings
Is there someone who has a similar problem?
thanks for the help
a greeting
3 REPLIES
marcus1234
Honored Contributor

Re: PROBLEM CONNECTION REMOTE CONSOLE

firt use explorer 6 or 7 mozilla etc not supported or
clear nv ram

To clear the system configuration:
1. Power down the server
2. Remove the server blade
3. Remove the access panel´look at the diagram on it it will show the position of the maintenace switch( it clears Nv ram)
4. Change position 6 of the system maintenance switch to on.
5. Install the access panel
6. and power up the server
7. Wait for the POST message that prompts you to change the switch setting:
Maintenance switch detected in the "On" position.
Power off the server and turn switch to the "Off" position.
8. Repeat steps 1 through 3.
9. Change position 6 of the system maintenance switch to off.
10. Repeat steps 5 through 7.



This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)

questionanswer
Occasional Contributor

Re: PROBLEM CONNECTION REMOTE CONSOLE

.
marcus1234
Honored Contributor

Re: PROBLEM CONNECTION REMOTE CONSOLE

thanks for feedback>>