PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7

[kev_riand]

Hi,

problem to update the firmware of the ILO 3 on an HP ProLiant DL 380 G7 server.

Here is the error message when the update in windows (error_ilo3.jpg)

I also tried using the web interface, but it hangs at 98% Receiving image

same problem on two identical servers

Thanks,

[BuildTheRobots]

Rather than using the windows package, you could just extract the bin file and upload it via the iLO web interface -this tends to be how we do things as default.

[kev_riand]

But it hangs at 98% as I explained in my previous message

[Oscar A. Perez]

What iLO3 version you currently have.

If current version is below 1.20, you need to flash to version 1.28 before you can flash to version 1.57. This is due to a change in image signing algorithm.

[kev_riand]

My version is 1.05

[Torsten. · Accepted solution]

Then go to 1.28 first, please.

[kev_riand]

Update 1.28 to solve my problem

[Torsten.]

Now you should be able to update to 1.57.

[Oscar A. Perez]

Don't forget to clear the browser cache after you're done upgrading firmware. Lots of changes to the iLO webGUI were made since 1.05.

[Torsten.]

Thanks for information oscar, but the new version is not listed when I search the web, e.g.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00045307en_us&docLocale=en_US,https://serverfault.com/questions/658529/ilo-3-firmware-update-hp-proliant-dl380-g7/885685 

 Lights-Out Management