- Community Home
- >
- Servers and Operating Systems
- >
- HPE ProLiant
- >
- ProLiant Servers (ML,DL,SL)
- >
- Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT ...
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО07-30-2013 08:57 AM - edited тАО08-01-2013 08:01 AM
тАО07-30-2013 08:57 AM - edited тАО08-01-2013 08:01 AM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
.
__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО07-31-2013 03:43 AM - last edited on тАО03-21-2023 01:13 AM by Sunitha_Mod
тАО07-31-2013 03:43 AM - last edited on тАО03-21-2023 01:13 AM by Sunitha_Mod
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
Thank you, but the question is how to find it if I don't have the direct link from you?
I looked under several servers with ILO3 and 1.57 is always the latest.
I was trying from this page too:
[Moderator edit: Updated the broken link]
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-12-2013 08:47 AM - edited тАО12-12-2013 08:52 AM
тАО12-12-2013 08:47 AM - edited тАО12-12-2013 08:52 AM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
If you click on the link for the Update itself (The text on the left) or on the 1.57 link or even the older 1.55 version, you are then taken to the page to download it. From there, click Revision History and scroll down until you find 1.28(B) and click THAT link (1.28 is a hyperlink).
Here's the Link to the page with the 1.28 (B) download that worked for me. If that doesn't work, do a google search for cp016892.exe and the first result will send you to the site i linked above.
I just had to do this as we had some that were still on 1.10 and 1.16 and could not figure out why I couldn't update to 1.65
Glad I found this post about needing to go to 1.28 first.
Brian
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО10-07-2014 09:37 AM
тАО10-07-2014 09:37 AM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
I also had this issue. It happened after I tried to update the iLO settings through the HP Lights-Out Online Config Utilitiy Windows tool. After disconnecting both power supplies for about a minute, then booting back up, I was able to then configure the iLO through the HP Lights-Out Online Config Utilitiy. However, it gave an error again and did not make the changes.
After about 2 hours of troubleshooting I fixed the issue. The iLO firmware version was too old to be updated through the Windows Utility I was using. The firmware version was 1.07 (I think). I was able to update the IP of the iLO through the Pre-boot environment (F8). I also followed this guy's [ http://youtu.be/domrAka9BNI ] advice and disabled the Power logo first. Not sure if it helped or not, but that's what I did.
I then connected through the WebGUI and updated the firmware.
If you are using an iLO firmware before 1.28, you MUST update to 1.28 first. Otherwise it will just time-out or not flash at all. I flashed from 1.07 >> 1.28B. Then I flashed from 1.28B >> 1.80. Even after all of that I still got an error with the Windows tool. This time it was more helpful and said invalid link speed. I disabled the auto speed setting and set it to 100. Now I was able to update through the Windows tool. For giggles, I switched it back to auto, and everything is still working. I suppose this could have been the problem all along (as opposed to firmware mismatch). Possibly if I would have just switched the link speed in the beginning it would have worked, but the previous firmware did not give informative error messages.
Hope this helps someone.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО02-18-2016 01:09 PM
тАО02-18-2016 01:09 PM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
Yes, flashed to 1.28 then on to 1.87 with no further proplem.
Kudos!!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-22-2016 02:43 AM
тАО12-22-2016 02:43 AM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
Just a quick look: iLO 3 V 1.88 FW has a problem - iLO watchdog reset without any rule on all servers.
Revert to 1.87 and everything is fine.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-11-2017 04:49 AM
тАО06-11-2017 04:49 AM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
I do have the same issue on G7 Blades and ProLiant servers. Flashing from 1.87 to 1.88 is fine, however sometimes the iLO is unresponsive for about 10-15 minutes. Ping still works but the Webinterface is unresponsive and cannot be accessed. However a Remote Console session that was opened before still works. After iLO is reachable again a message is logged: "Watchdog reset on Initial, pc 0007c5b8, sp 00524e10"
Please fix this as soon as possible. Can we get a response from a HP employee?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-11-2017 10:56 PM
тАО06-11-2017 10:56 PM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
No any valid solution with iLO 1.88 FW.
We have test this firmware on our BL450c Blade Servers - the results is the same.
Hope this should be solved with new FW (if any, in the future).
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-16-2017 06:30 AM - edited тАО06-16-2017 06:35 AM
тАО06-16-2017 06:30 AM - edited тАО06-16-2017 06:35 AM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
Well the last firmware was released in July 2016. Not sure why HP isn't fixing this. There are known security vulnerabilities so downgrading to 1.87 is not really an option but a crashing iLo isn't either.
It seems like the issue only occurs when the iLO has a public IP. My internal iLOs do not show this behaviour. Maybe it's caused by a port scan on a specific port or something else triggered by probably hacked servers.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО06-16-2017 06:49 AM
тАО06-16-2017 06:49 AM
Re: PROBLEM UPGRADE FIRMWARE ILO 3 on HP PROLIANT DL 380 G7
You are right - on the local (internal) network iLO v1.88 works fine. We have checked all access/error list by public IPs via our firewall - no any port scanner or server hack detected. We also changed https port - use something like 4043 - the result is the same.
Someone from HPE staff - your comments are highly appreciated.