ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PROBLEM WITH RECOVERY SERVER

HP PROLIANT DL 380 G3
Occasional Visitor

PROBLEM WITH RECOVERY SERVER

HI, I HAVE 2 SERVERS HP PROLIANT DL380 G3 WITH MSA500 RACKED, AND NOW I'M WORKING WITH THE SECOND SERVER (RECOVERY SERVER) BECAUSE WHEN SWITCH ON THE PRIMARY , IT SEE THE 2 LOGICAL DRIVE AND ALSO CHE SMART ARRAY 5i BUT IT SIGN THE FOLLOW ERROR: "Non System disk or disk error" AND ALSO IN THE BIOS/ARRAY CONFIGURATION IS ALL OK . . . WAITING FOR YOUR PROMPT REPLY . . . I HAVEN'T SOLUTIONS . . THANKS. DANIELE
2 REPLIES
SPa
Trusted Contributor

Re: PROBLEM WITH RECOVERY SERVER

The first thing I would check is the BOOT CONTROLLER ORDER.

To check that,Press F9 to enter Rom Based Setup Utility,when the server prompts for during POST.Go to Boot Controoler order and ensure Smart array 5i is set as Boot controller.Change the order if required.
HP PROLIANT DL 380 G3
Occasional Visitor

Re: PROBLEM WITH RECOVERY SERVER

I HAD JUST COTROLLED THE BOTT CONTROLLER ORDER AND THE SMART ARRAY IS THE FIRST.