ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PROLIANT DL185 G5 W/ P800 CONTROLLER WONT BOOT

GroundRat
Occasional Visitor

PROLIANT DL185 G5 W/ P800 CONTROLLER WONT BOOT

I have an HP Proliant DL185 G5 Storage Server w/ p800 Controller. After booting it said battery 1 and 2 were bad and needed replacing. I removed the P800 and removed battery 1 (extremely swelled) and left battery 2 in place for now until replacements arrive. After reinstalling the P800 the system refuses to boot. 

After running the Offline ADU boot disc it says "No controllers detected". 

I have a solid Amber on LED 3 (Diagnostic error) and LED 4 (Drive Error)

None of my hard drives show any activity or health LED's either on the front panel, they are all dead.

Any advice? Is my p800 a dead stick and needs replacing?

Thanks in advance

1 REPLY
Kiran_servers
Occasional Advisor

Re: PROLIANT DL185 G5 W/ P800 CONTROLLER WONT BOOT

Hello,

Is the server booting to BIOS if so please check if controller is detected in BIOS.

Kiran kumar m
Bangalore