ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PROLIANT DL380 G5 + StorageWorks MSA2000 What i need to make it works

 
SOLVED
Go to solution
EmmanuelDLSC
Occasional Contributor

PROLIANT DL380 G5 + StorageWorks MSA2000 What i need to make it works

Hi,

 

I have a few questions. Im new at this and i need some clues.

 

I have an Proliant DL380 G5 and i need to connect it to my StorageWorks MSA2000. StorageWorks have an mini SAS port then i need to connect it to SAS port on my PROLIANT but i don't have any port SAS on the back panel on my Proliant obviously i need the card for this.

 

Which card is, how can i obtain an exact model that works for my Proliant DL380 G5 ?

Adding this Card will affect the current SAS disks installed on the server ?

 

Server : HP PROLIANT DL380 G5 E5405

StorageWorks : HP StorageWorks MSA2000

 

Thanks !

 

 

P.S. This thread has been moved from Servers > General to ProLiant Servers (ML,DL,SL). - HP Forum Moderator

3 REPLIES
Torsten.
Acclaimed Contributor

Re: PROLIANT DL380 G5 + StorageWorks MSA2000 What i need to make it works

What MSA2000 model do you have?

All have SAS connectors for expansion boxes, not servers.

There are host connections available for FS, SAS, iSCSI and combinations.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
EmmanuelDLSC
Occasional Contributor

Re: PROLIANT DL380 G5 + StorageWorks MSA2000 What i need to make it works

- MSA2000 model 2012FC
- Yes it have an SAS connector an mini sas output but the question is on my server PROLIANT DL380 how i connect it to that port ?
- There are none host connections with SAS
Torsten.
Acclaimed Contributor
Solution

Re: PROLIANT DL380 G5 + StorageWorks MSA2000 What i need to make it works

if you have the fc model, you need a fc hba.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!