ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

PROLIANT ML110 doesn't boot

GIL Michel
Occasional Visitor

PROLIANT ML110 doesn't boot

on the front panel, le power LED blinks 4 times, then stops blinking, then blinks 4 times and again... the fans are not turning. The power bloc seems to be working fine. The CMOS battery has been tested and removed for 30 minutes, but the problem continues. It's seems like the server has turned to a "sleep safety mode". How can I get out of this mode? Thanks for your answer.
Honored Contributor

Re: PROLIANT ML110 doesn't boot

You did not mention which "G" server you have but the ML110 G3 has a 4-blink status of "crowbar" on page 45. Not sure what it means.
If you don't have the G3 find your "maintenance and service guide".