PRoliant DL320 doesn't power up after Halt command

[Andrea Zanetti]

I've recently had to work to an hold proliant DL320 G! server. After installing linux (debian etch 4.0) everything worked fine, i give the halt command and brought the server in place BUT when i pressed the power up switch nothing happened... I really dont know what to do...

[Steven E. Protter]

Shalom,

1) unplug and replug the server.
2) test if the power button, physical works.
3) Connect to the ilo card if configured
4) Contact HP Hardware support.

SEP

[Andrea Zanetti]

Thank you for the fast reply!

I did the first two steps than skipped the step three (the server haven't a ilo card). When re-inserted the plug the server self powered on and emits one long beep and three short beeps. Before contacting the hp hardware supporti want to try to solve the problem by myself (warranty is over... and the server is old...)

[SKR_1]

Something hardware issue!!!

Try to do refix the memory on the server , if you can do it then only. Otherwise you may need to contact HP H/W support.

Thanks

SKR

[Gokul Chandola]

Hi,
Please make dust free to server inside and then reconnect memory.
Due to dust this problem is generally occure.
May be you will get resolve this problem.
Otherwise you have to Take HP Support.

Regards,
Gokul Chandola

[ssimonek]

Try to unplug the power cable.
Press power button.
Normaly, the ethernet leds are now turned off.
Plug the power cable, and press the power button.

If nothing's better => verify the alimentation box, you can test the DC output or try with another one if you have a second DL320 server :)